HYPE

Completed

The Hydrogen storage is currently one of the key technologies to leverage the Hydrogen value-chain and its applications, in particular for transportation. The HYPE project addresses the main issues regarding the compressed-Hydrogen storage for automotive application: cost, volume and customer/social acceptance. The project final demonstrator will be a compressed-Hydrogen cylinder featuring an enhanced storage capacity and its fire protection though maintaining the same volume and cost.

Project benefits

Suivi de projet - Fin du projet : 1

Rapport final : 8

Suivi de projet - Fin du projet : 7

People involved in the project

Member partner

No member partner

ULLIT

AIR LIQUIDE

LABORATOIRE FEMTO-ST

SOFICAR

INERIS

LABORATOIRE PIMM

Information of the project

Start of the project on01 / 01 / 2008 | End of project on01 / 01 / 2011

Strategic business lines

Smart power grids

Smart power grids

Referent of the project

Florentin BORÉ
Chargé de projets innovants

06 66 39 55 43

florentin.bore-ext@st.com

Centre-Val de Loire

These projects may be of interest to you

Back to the projects

SOLID

The SOLiD project will create a sustainable and cost-efficient pilot scale manufacturing process for a…

SPARKLIN CONNECTED DOCK

Study to evaluate the evolution of the Spark1 connected socket in order to adapt it…

ZORG

The ZORG project aims to achieve a unified understanding of the links between zinc electrolyte…

HOMERE (2022)

The HOMERE project aims to develop new electroactive materials of the polymer/carbon type to improve…

ORCHESTRA

The overall objective of ORCHESTRA is to design, elaborate and rationally evaluate porous architectures based…

EDEN4SG

Because the large-scale deployment of electric vehicles represents a challenge, the EDEN4SG project aims in…

DEFI BATT

The objective of the project is to design new coated current collectors adapted to the…

CHAIRE ELHYSE

The objective of the ELHySE Chair led by Laboratoire Ireena is to improve the performance…

DC2PORT

The objective for the summer of 2022 with the "DC2Port" project is the manufacture and…

HYDELEC

The innovative project is the development of a process for the elaboration of ceramic electrochemical…

FAM-FOWT

The subject of the project is, on the one hand, the evaluation of the fatigue…

DECIDATA

The issue of data, its management and the structuring of the resulting information is inseparable…

VITISOLAR (RÉGION NA)

The objective of the VITISOLAR project is to achieve a sustainable agrivoltaic solution for the…

REDZIM

The aim of the project is to develop an innovative aqueous Zinc/Manganate-Permanganate hybrid Redox-Flow system…

FARWIND (I-LAB)

Offshore wind energy is a renewable energy source of exceptional quality. However, it is completely…

VITISOLAR (APR ED ADEME)

The objective of the VITISOLAR project is to develop a sustainable agrivoltaic solution for the…

ODRI

SRD and its partners have decided to respond to the call for projects from the…

HYDELEC 2

The objective of the HYDELEC2 project is to prepare the production in very large series,…

CROISIC GRID

The project consists in developing a collective self-consumption loop in order to valorize locally the…

SF THT

The objective of the "SF-THT" project is to offer a complete tool for Network Managers…

CAPENERVOX

This project aims to set up a unit capable of significantly reducing (22%) the use…

HYBIOGAZ

Development of a multi-energy production and distribution terminal for mobility.

LOLABAT

Sunergy has developed a 10 and 30Ah Nickel-Zinc (NiZn) battery technology, able to cycle 2000…

OASIS

Experimenting with an innovative, sustainable and economically viable energy storage solution that enables the power…

CREATIF

The objective of the "CREATIF" project is the implementation of a new "real-time" simulation tool…

LADHY V2 2020

The introduction of an ever increasing amount of intermittent energy production onto the electrical grid…

NEO AMMONIA

The Neo Ammonia project associates the Institute of Chemistry of Condensed Matter of Bordeaux (ICMCB),…

DEMCOM – REDEPOT 2020

Durable and Environmental design of Monitored COncrete structures in Marine environment

MOMENTA

The MOMENTA project is interested in improving the modeling / forecasting of aeroelastic loads induced…

H2OUEST

The objective of the H2Ouest project is to create an ecosystem for hydrogen mobility in…

E-PARADISE

The increasing use of autonomous electronic devices implies a growing need for electrical energy to…

RECUPELEC REZO V2

Development of new power grid support services based on LFP Li-ion battery storage systems shared…

RESTORE

RESTORE brings together four companies (ARMOR Solar Power Films, Dome Solar, Armorgreen, EVEA) and a…

QAIROS ENERGIES

Qairos Energies enables the production of green gas from biomass (mainly agricultural) with a production…

RACK STATIONNAIRE

The "Rack Stationnaire" project aims to develop a modular stationary energy storage solution. The Li-Ion-Cells…

HYBER

The HyBer project is an ambitious initiative to create a hydrogen ecosystem in the department…

ATHENA HNV

The goal of the HNV project (Hydrogen New Version), carried by the company ATHENA RESEARCH…

ALIENOR

With the increasing penetration of renewable energies in the distribution network, it has become essential…

MATILDA

The aim of the project is to quantify the error due to buoyancy movements of…

EKATE

Encourage business investment in R&I, by developing links and synergies between businesses, research and development…

ORIGAMI

The ORIGAMI project aims to address the integration of the energy production of EMR systems…

OCEOS

The objective of the project is to establish a method of sizing the cycle of…

SEG-NET

In response to stakeholder needs for more coordination in smart grid metrology, a European Metrology…

FLOAWER

In 2016, wind power covered 10.5% of the EU’s electricity demand, with 154GW of installed…

ESTUAIRE

The Nantes-Saint-Nazaire Port Authority (GPMNSN) and the agglomeration community of the Nazaire region and the…

PHOTOMOF

The objective of this project is to develop thin layers made up of photoactive hybrid…

SYSTER

The transport and exploitation of renewable energies make use of increasingly complex electromechanical conversion chains…

ASAPE

Increasing the lifespan of wind turbines is one of the main topics of investigation faced…

CHROMIC

CHRoMIC's ambition is to implement a set of numerical methods capable of accurately and efficiently…

ECOSFARM

The objective of the ECOSFARM project is to set up a generic numerical simulation tool…

MATHYSE2

The development of sustainable production and storage of energy is one of the essential links…

ECOREVE

ECOREVE concerns the electrolysis of water vapor at high temperature. It brings together 2 CNRS…

COMEOL

The goal of the project is the modeling of the control with dynamic reconfiguration of…

MOBEL-CITY

The aim of the MOBEL_CITY project is to propose an innovative energy system. At the…

METHYCENTRE

The Methycentre project is the first Power to Gas demonstrator in France coupling methanation with…

ORGALIGHT

Fluorescent organic molecules are crucial tools in many areas of science and technology, particularly energy…

SUNSTONE

The SunSTONE project aims to develop a tool for the smart control of district heating…

EPROSS-2E

Nowadays, the storage of electrical energy is a major technological challenge and a key link…

TACOT

The goal of the project TACOT is to demonstrate the applicability of thermoacoustics for refrigeration…

SICAME

The solution studied responds to the problem of prediction and localization of electrical faults on…

ODYSEA

The ODySEA project is part of the overall development of the REMORA system by SEGULA…

SCAP3D

The SCAP3D project consists in developing a microsystem for the storage and redistribution of high-power…

MELUSINE

The project aims to identify the mechanisms of degradation of electrochemical cell materials over time…

PASBLOC

With its expertise in the field of connectivity, especially for power management facilities, PASMAN wants…

SYSTEME DE GESTION DES FLEXIBILITES

Enerdigit is operator of electricity consumption erasure. Consumption erasure aims to secure the electricity network…

EPENON

Wind turbines must make the most of the available wind, in order to produce electricity…

QT4

This project, supported by QOS Energy, aims to develop a second-generation EnR monitoring platform capable…

SMART GRID MONITORING

The Smart Grid Monitoring project aims to develop connected sensors for permanent monitoring of wired…

CELEZ

This project is intended to develop high-performance active materials for the design of new-generation photovoltaic…

FLEX-ADAPT

Flex-Adapt offers a solution for dynamic control of the electrical energy consumption of heating, ventilation…

GREENHOPE

The GREENHOPE project proposes to develop a science allowing to rationalize and optimize the electrochemical…

CONNECTE-CITY (FUI21)

The CONNECTe-CITY project, built by companies and research laboratories with the help of decision-makers in…

POLHUCS

The manufacture of polymer material parts, particularly for the storage of hydrogen, meets increasingly complex…

INOCELL

The subject is the Electrolysis of High Temperature Water Vapor (EVHT or EHT), a very…

NEELHF

The aim is to develop a flexible Neel Effect® current sensor with a very high…

DEESSE

The objective of this project is to develop a sizing tool for a massive storage…

ALEPH

The ALEPH program aims to develop a lithium metal battery operating at 40 ° C.…

IVEDS

This proposal addresses a major problem of energy storage : increasing the volumetric energy density…

SIBERSITE

The SIBERSITE project aims to develop and electrochemically study high-potential materials in the high-energy battery…

SUGGEST

The aim of this project is to develop chemically designed 3D graphene architectures with the…

VOSS B

For several years, Energiestro has been developing flywheel energy storage, which has the advantage over…

AIR4STOCK ID

AIR4STOCK is a built-in compressed air energy storage system that is an innovative and relevant…

FLUIDSTORY

Massive energy storage is a major challenge for the integration of renewable energies in the…

IBOCS

FMGC, a major industrial smelter, and INNOSEA, an engineering company specializing in EMRs, combine their…

VLC

In 2013, VLAD decided to launch the feasibility study for a hybrid public lighting head.…

N AIR J

The main idea of this project is to study the potential of clean energy recovery…

DESLIS

In future household and transportation applications intermittent energy sources such as solar or wind power,…

STOLECT 1.0

The STOLECT project concerns the massive storage of electricity. The process is based on a…

COMBIPOL3

CEA Le Ripault, in collaboration with AREVA SE, has developed a composite bipolar plate manufacturing…

PREMHYOME

The CEA has shown through the programs ANR MENHYR and ADEME MENHATE the very strong…

EMODI

EMODI is an industrial research project, whose goal is to optimize the predictive and curative…

SUNHYDRO

Many countries, such as France, have committed to developing their renewable energy production infrastructure. The…

SMARTEOLE

Improving the efficiency of wind power generation is a major challenge to ensure the profitability…

CORGEOSOLA

Geothermal baskets have appeared on the French market in recent years as new solutions allowing…

VOLTA

This basic research project aims to identify and develop solid organic insertion materials (mono-molecular state)…

SG85

The Vendée Smart Grid project will study the Vendée electricity system with the production of…

NEWMASTE

NEWMASTE is a multidisciplinary project lasting 3 years involving academic and industrial skills. The main…

H2E-CAP

This fundamental research project brings with it the development of new supercapacitor hybrids with high…

SAPACPV

This project aims to demonstrate the feasibility of an autonomous dual-energy weather station PAC /…

DJANGO

The DJANGO project focuses on Electrolysis of High Temperature Water Vapor (EVHT or EHT). This…

STOCK-EN-SOCLE

The Stock-en-socle project aims at acquiring knowledge necessary for the periodic storage of sensible heat…

ARCAPAC

The viability of PEMFC type systems in technological and economic terms is mainly conditioned by…

COPERNIC

The general objective of the project is to study the axes of performance improvement and…

MDE MAC 3

The control of the energy demand (M.D.E.) in the field of electrical installations requires, ideally,…

IVERD

The VERDI project (Electric Vehicle and Renewable Energies in an Intelligent Distribution Networks) proposes the…

MENAHTE

The aim of this project is to improve the life span and increase the temperature…

HY-TRAC

The HyTrac (Hydrogen for Traction Chain) project aims to create a "hydrogen traction" sector offering:…

ARPPCM

Thin film solar cells are attracting increasing interest because of the low consumption of active…

ICARES

The objective of ICARES (Interface for Anodes Conversion: Reliability and Efficiency Studies) is to optimize…

MICRO-GEO

The MICRO-GEO project aims to create a complete system offer for the market of the…

SOLEKA

Renewable energies are termed intermittent, because of the random side of production related to meteorology.…

CEZNO

Recent advances in material manufacturing processes allow for greater control of chemical compositions and geometric…

BLADES

The use of Li batteries in electronics (home and mobile) results in a significant increase…

CARTOCOMBI

The oxide materials deposited in thin layers are promised a good application future, traditional areas…

PERSYA

Persya is a platform with test facilities for simulating and instrumenting complete photovoltaic solutions (panel,…

AMADEUS

The cost reduction of fuel-cells remains one of the main issue for their large market…

ENAMU

The NAnocomposites MUltifunctional ELectrodes (NaMuEls) open amazing opportunities to process super-capacitors, solar cells or even…

ENERSTOCK3

The inclusion of renewable energies on non-interconnected island networks such as the DOM is a…

TOLEDO

The TOLEDO project studies the behaviour composite high-pressure H2 tanks subject to mechanical impacts on…

MEMFOS

Nowadays, there are no actual membranes for PEMFC (Proton Exchange Membrane Fuel Cell) featuring high…

CREOLE

The braking devices for the pitch control of wind generator nacelles often generate screech noise.…

AUXIOXY

The micro-cogeneration uses the gases generated by combustion to produce electricity. The AUXIOXY project targets…

SINEOLE

Looking to a wind farm, it is not unusual to find one wind generator stopped…

ASTRIJE

The ASTRIJE project develops an innovating ink-jet printing technique for the processing of the anodes…

ELECTROLYTE

The thickness reduction in fuel-cell cores allows a lower operating temperature (700°C/1292°F) than in conventional…

PREMHYS

One of the major challenge to a mass-adoption of fuel-cells remains their cost reduction. With…

OSIRHYS IV

The OSIRHYS IV project aims at qualifying calculation codes and models developed for the design…

AIRELLES

Thanks to the electrolysis process one can produce hydrogen with electricity. Nevertheless this process remains…

ENDEMAT

Currently, the design, manufacturing, qualification and use of composite tanks for the storage of compressed-gas…

ELOGE3D

The current planar micro-batteries attached over integrated circuits feature a limited energy storage capacity. The…

MASCOTE

The MASCOTE project aims at developing a novel industrial process for the bipolar plates which…

MOBIPAC

The MOBIPAC project aims to develop portable energy sources based on radically innovative solutions, whether…

EXHYNUMO

The storage of Hydrogen for a mass market use raises particular concern about fire and…

CEPIM

The CEPIM project aims at the development and demonstration of a novel concept for modular…

PRODHYGE

Realization of a high temperature fuel cell demonstrator for the stationary (SOFC) with a new…

SÉSAME-CARENE

Faced with the inexorable exhaustion of fossil fuels, the renewable energy market is now growing…

MICONOS H2

The main goal of this project is to validate new materials and a new "all…

MENHYR

Hybrid membrane for high temperature fuel cell. The project proposes to explore the possibilities of…

HYBOU

Bouteille Hydrogen: Development of innovative materials for polymeric liners and composite shells of Type IV…

INNOVAME

Design of innovative materials and components for the manufacture of PEMFC-type fuel cell membrane electrode…

NANOCOMBI

Combinatorial oxide deposits at sub-nanometric scale by multi-target laser ablation for the realization of integrated…

CIEL

Individual Electric Boiler. Integration of an SOFC stack in an individual natural gas boiler. For…